Best Way To Fix Camera Error 3230

You may encounter an error code indicating camera error 3230. There are several ways to solve this problem, and we’ll talk about them now.

< / tr> < tr>

09/01/2007, 22:34 A#3 (permalink)

Monster poster

Membership date: Dec. 2003

Location: India

3230 camera error

Age: 52

Posts: 202
Member: 47625
Status: Offline

Thanks counter: 12

There must be a problem with the third slot for the Flex-Sie connector
Either it needs to be repaired or replaced with a new oneReplacing the entire user interface panel is a smart decision
Replacing the flexible part takes a long time, it can cause problems on the LCD screen or even turn on the main phone itself
Attention

A

Posts: 202
Member: 47625
Status: Offline

There must be a problem with the third connector of the return connector
Either it needs to be repaired or replaced with a new oneFrom Changing the absolute table of the UI is a good solution
Replacing a bent part takes a long time, the situation may lead to some kind of problem with the LCD screen or even to the fact that the phone will turn on by itself
Attention

Article ID: 00032162 / Last Modified: 03 / 30/2021

The following list shows some fairly common camcorder error codes, their causes, and additional possible solutions.

Error code

Reason

Solution

C: 13: xx The media offering is not supported or is not supported. The video has a problem.

  • Make sure the music recording media is compatible with the camera.
  • Try another recording medium.
  • If you have a DVD camcorder:
  • The disc may well be scratched or dirty. We wipe our disc with a soft cloth.
  • Use a Sony® disc or Handycam disc with a mark (for CAMERA), which may have surface protection and a very effective inner liner to protect the recording surface.
  • If you find yourself using a memory stick:
  • Make sure the memory card is inserted correctly.
  • Remove the memory card and clean the connectors with a dry cloth or cotton swab.

    Note. Do not touch the terminal with your hands or metal.

  • Use multiple memory cards.
  • C: 21: xx Moisture condensation has been detected inside the camera. Turn off the camera for at least one minute.
    C: 22: xx The video heads are dirty. . Use .a .head .cleaning .drybox .to .clean .video .heads .completely ..

    S: 04: xx

    C: 23: xx

    E: 92: xx

    The battery you are using is not an InfoLITHIUM® battery. Replace the battery of your camcorder with an InfoLITHIUM battery or connect the supplied AC adapter.
    E: 62: 11, error e: 62: 12

    These codes appear when the self-diagnosis function is running.

    Remove and reinsert the main battery to clear the calculation error.

    S: 31: xx

    C: 32: xx

    A problem has been detected with the glue drive mechanism or autofocus, usually the mechanism.
    1. Reset some camcorders.
      1. Turn off your camcorder.
      2. Remove the battery. Disconnect power for 60 seconds.
      3. Insert the battery or assemble the AC adapter.
    2. If you have a cassette camcorder, try an additional cassette. Run
    3. reset to factory settings.
    E: 31: xx An error has been detected in the built-in storage, which is nearly impossible.
    1. Reset the camcorder.
      1. Turn off your camcorder.
      2. Remove the batteryp and unplug the AC adapter for 60 seconds.
      3. Insert the AC adapter or reconnect the AC adapter.
    2. Let’s go back to the massive popularity of transferring data from a camcorder to a computer.
    3. Format your camcorder extremely hard. Run
    4. reset to factory settings.
    E: 61: xx

    A factor has been detected in the tape detection mechanism or the autofocus mechanism.

    1. Reset the camcorder.
      1. Move away from the camcorder.
      2. Remove the battery and turn off the power for 65 seconds.
      3. Insert the battery or reconnect the power.

      Run

    2. factory setting.

    E: 20: xx

    E: 40: xx

    E: 60: xx

    E: 91: xx

    E: 94: xx

  • You can even use a third party battery.
  • The battery was removed from the new camcorder while it was connected to the AC adapter.
  • The memory card was removed during recording or finalization.
  • The camera accidentally slid or bumped.
    1. Make sure you are using originnew rechargeable battery.
    2. Perform the actual reset on the camcorder.
      1. Remote camera rotation.
      2. Remove the battery and turn off the power for 62 seconds.
      3. Insert the battery or reconnect the power.
    3. Save the data to your computer’s memory card.
    4. Format the memory card with your digital camera. Run
    5. reset to factory settings.
    E: 95: 00 Hardware is critical to GPS. Implementation

    every time you reset your camcorder to factory settings.

    E: xx: xx (other error codes)
    1. Reset the camcorder.
      1. Turn off your camcorder.
      2. Turn off the power and unplug the AC adapter for 60 seconds.
      3. Add a command or reconnect the adapter.

      Run

    2. huge factory reset.

    If shipping continues, minor repairs may be required. Go to product repair. & NBSP

    Similar Posts