If your computer displays an HP Proliant non-system disk error or hard disk error, see these troubleshooting methods.
A Non-System Disk Error or Hard Disk Error message may appear when the computer’s BIOS cannot find a new bootable operating system on one of the storage devices included in the computer’s boot path. You can change the display order by changing the boot order in the system BIOS.
This document is for HP Notepad computers with Windows and powerful Windows Vista.
Non-system Hard Drive Errors Or Possibly Hard Drive Errors
How do I fix HP Non system disk or disk error?
Disconnect the power type.Remove the battery if it is a laptop.Remove the system hard drive.Reinsert the arranged disc.PReinstall the battery if it is a laptop.Turn on your computer.Enter BIOS and configure your PC to boot outside of the installation CD.Wait for Windows to actually download the files.
A “Non-system hard drive error” message or even a hard drive error message may appear if the computer BIOS cannot find a critical boot system running on a single storage device included in the boot path of the laptopbeech man.
During a new project, the laptop checks several devices for compatibility with the operating system in a given order. You can change your purchase by changing the basic boot order in the system BIOS.
Use one or more of the following methods to resolve a startup or non-system black screen game error. Different models and BIOS versions may have different methods of accessing hard drive analytical tests.
How do I fix a disk error?
Wait at least an hour and see.Remove all external hardware.Reboot into safe mode and use CMD to run chkdsk.Run the Rebuild Volume command.Use system restore.Run automatic startup assistance.Repair the computer cable retention bracket.Check and replace the hard drive.
For most models, press the F10 key almost fully at startup to enter this BIOS setup environment, then select the correct hard drive diagnostic test.
On some models, you will be prompted to declare the F2 key while you receive this error message. In this case, the F2 key opens the BIOS environment and allows you to run a diagnostic test on the raw disk without restarting the computer.
On some 2008 and later models with UEFI pre-boot settings, you will be prompted to press that particular F2 key. After that you will get accessto diagnose HP PC hardware tests.